Vickers PV028R1K1T1NKLC4545 Piston Pump PV Series

ra max.:1.5 mm; d2:115.4 mm; Preload class B GB:1000 N; Calculation factor f2B:1.02; D:150 mm; Calculation factor fHC:1.02; r3,4 min.:1 mm; D1:134.6 mm; r1,2 min.:1.5 mm; Da max.:143 mm;

Calculation factor Y2:3.6; da min.:878 mm; Reference speed:20 r/min; D1 ≈:1105 mm; D:1220 mm; K:15 mm; Calculation factor Y0:2.5; Da max.:1192 mm; Basic dynamic load rating C:15078 kN; Mass bearing:1355 kg;

Grease Speed Rating n1:18000 rpm; Fillet Radius ra:0.64 mm; B:20.00 mm; d:12.000 mm; Basic Dynamic Radial Load Rating C:13300 N; Oil Speed Rating n2:22000 rpm; D:32.0000 mm; Fillet Radius rb:0.30 mm; Basic Static Radial Load Rating Co:7800 N;

PG:1/8 NPT; Cap bolt:2 x 1/2-13 UNC; Pa:3.4 kN; RG:1/8 NPT; h:33.337 mm; P90°:20.9 kN; H1:69.85 mm; P120°:13.3 kN; J max.:200.025 mm; Da:100 mm;

Accessories:Two Seals; d:105.000 mm; Basic Static Radial Load Rating Co:153000 N; Basic Dynamic Radial Load Rating C:182000 N; Grease Speed Rating n1:2800 rpm; Fillet Radius ra:2.50 mm; Sealed Speed Rating n3:2000 rpm; Oil Speed Rating Open/Shielded n2:3400 rpm; Oil Speed Rating n2:3400 rpm; D:225.0

Oil Speed Rating Open/Shielded n2:8500 rpm; Basic Dynamic Radial Load Rating C:55300 N; D:100.0000 mm; B:25.00 mm; Sealed Speed Rating n3:4900 rpm; Fillet Radius ra:1.50 mm; d:35.000 mm; Grease Speed Rating Open/Shielded n1:7000 rpm; Basic Static Radial Load Rating Co:31000 N; Accessories:Two Seals

d:280.000 mm; Basic Static Radial Load Rating Co:285000 N; Sealed Speed Rating n3:950 rpm; Fillet Radius ra:2.00 mm; D:380.0000 mm; Basic Dynamic Radial Load Rating C:216000 N; B:46.00 mm; Accessories:Two Shields; Oil Speed Rating Open/Shielded n2:1800 rpm; Grease Speed Rating Open/Shielded n1:1500

J:350 mm; End cover:ASNH 524-620 R; H:271 mm; P150°:320 kN; Cap bolt, size:M 20x100; Adapter sleeve:H 320; Q150°:360 kN; N4 max.:8 mm; P180°:400 kN; Locating ring:2 x FRB 19,5/215;

Grease Speed Rating n1:4500 rpm; Basic Dynamic Radial Load Rating C:80900 N; d:45.000 mm; Oil Speed Rating n2:6000 rpm; Accessories:Two Seals; Sealed Speed Rating n3:4500 rpm; Basic Static Radial Load Rating Co:80000 N; B:42.90 mm; D:100.0000 mm; Fillet Radius ra:1.50 mm;

B:80.00 mm; Grease Speed Rating n1:2200 rpm; Fillet Radius ra:2.00 mm; D:215.0000 mm; Basic Static Radial Load Rating Co:390000 N; Basic Dynamic Radial Load Rating C:319000 N; Oil Speed Rating n2:2700 rpm; d:120.000 mm; Fillet Radius rb:1.00 mm;

Bearing (basic designation):C 3076; P0°:6000 kN; Appropriate attachment bolt, size G:36 mm; Labyrinth seal:2 x TS 84; P180°:3000 kN; P120°:2600 kN; H:675 mm; Q180°:2100 kN; Appropriate attachment bolt, rec. tightening torque:2280 N·m; db:400 mm;

Reference speed:400 r/min; Mass bearing (including seat washer where applicable):135 kg; da min.:458 mm; Minimum load factor A:180; H:160 mm; Fatigue load limit Pu:10.4 kN; D:540 mm; ra max.:4 mm; r1,2 min.:5 mm; Basic dynamic load rating C:1040 kN;

Bearing:22311 EK; Adapter sleeve assembly:SNW 111x1.7/8; ba:36.513 mm; RG:1/4 NPT; Cap bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:149.1 N·m; H2:30.163 mm; J max.:241.3 mm; Cap bolt, SAE grade:8; H:157.162 mm;

Grub (set) screw size:M6; d1:81.5 mm; B3:3 mm; G:M 75x2; B:16 mm; Axial static load carrying capacity:134 kN; Mass lock nut:0.35 kg; h:3.5 mm; b:8 mm; Associated spanner:HN 15;

Lock washer / Locking clip:MS 3084; Mass lock nut:17 kg; d3:490 mm; B:52 mm; d1:462 mm; Associated spanner:TMFN 64-80; h:14 mm; B3:10 mm; b:32 mm; d2:439 mm;